Home > News > Content
How To Use An Oxygen Concentrator

  How to use an oxygen concentrator

  The oxygen concentrator uses the oxygen supplied by the supplier who needs a higher concentration of pure oxygen. Concentration is often used at home and set in clinical settings. The machine draws oxygen directly from the indoor air and does not use oxygen cylinders. Nitrogen is absorbed by the machine and re-released into the indoor air, providing only pure oxygen patients. Oxygen cylinders do not have high flammability at risk of oxygen cylinders and do not need to be refilled. But about 3 feet, 3 feet, they are not easy to carry. Concentration requires several steps to set up a little bit of maintenance to work properly.

  step 1

  Will focus on the wall. Make sure that the concentrator can reach you without using an extension cord. A nipple adapter or foam humidifier for the machine. Fill the maximum filling line of the foam humidifier with distilled water. Add the necessary oxygen to replenish moisture when the water reaches the "lowest" line.

  Tube end cap - 180 ° bend water cooling plate cooling water pipe

  Step 2

  Add oxygen tube, nipple adapter or foam humidifier. Central Oxygen Do not use pipe length over 50 feet. Attach the end of the tube of the connector. The nose tube or other oxygen on the mobile device on the tube end.

  Step 3

  Place the nasal catheter into the tip of the nose up to about 6.3 inches. Take the nasal catheter to the oxygen tube around the ear. The rest of the pipe, allowed to fall below the chin, or behind the back. Adjust the tube, the tube under the skin close fit. When using an oxygen mask, cover the mask behind the mouthpiece. Adjust the sealing of the strap by pulling the mask on each side of the loose elastic band.

  Step 4

  Open the oxygen machine, set it to the appropriate leveling, prescription by the doctor. Only in the specified time and amount, use the concentration. Do not adjust the flow level, or use more than the specified time. Make sure that oxygen is found by a button on the concentrator that correctly indicates the normal flow. The button may have a green light.

  Step 5

  Watch the yellow or red light and the oxygen system is unusually concentrated. The lamp may indicate that the oxygen flow is blocked. Check that all pipelines and connection concentrators are not working properly. Please call the machine to buy the machine or the manufacturer's machine if the machine is not working properly

  Arrange inspection. Use a spare oxygen system until the problem is solved.